Exi Ting The Instal Ler Menu; Event Logger - Bentel Security Kyo 320 Installation Manual

n Exi ting the Instal ler menu
To exit the Instal ler menu, press ESC:
INSTALLER MENU
Confirm?
Press ENTER to con firm to exit the Instal ler menu. If
you press ESC you will be in the pro gram ming fase.
When you exit the Instal ler menu, only if the system has
a num ber of PREMIUM LCD and CLASSIKA LCD key -
pads gre a ter than 5, the up da te strings fase fol lows.
+
If you exit the PROGRAMMING menu af ter chan -
ging the pa ra me ters of the Re ce i ver or a wi re less
key, the di splay may show the fol lo wing mes sa ge
PROG. WLS RECEIV
PLEASE WAIT
If the Con trol Pa nel has not pro gram med the Re ce i ver, the
di splay will show the fol lo wing mes sa ge:
PROG. WLS RECEIV
ERROR
If this oc curs, check that the Re ce i ver is ope ra ting pro perly.
If you exit the PROGRAMMING menu the Con trol pa nel will:
Ø set the key pad to standby sta tus;
Ø re set the zone cycle co un ter;
Ø cle ar the BPI, Tam per and Fal se key/card war nings;
Ø igno re the open Main unit event (un til af ter clo su re);
Ø re start the Call que ue from the in ter rup ted call.
+
The Con trol pa nel will ge ne ra te a "Start Pro gram -
ming" event each time you exit the INSTALLER
MENU (this event will be si gnal led on the G in di ca -
tor on the Key pads, and by the Start pro gram.
mes sa ge in View Tro u ble mode).
"Start Pro gram ming" events can be de le ted by Acti ve User
Co des only, via the Re set PC Prog. from the USER MENU.

Event logger

This com mand will al low you to view and print the
events in the Event Log ger. The KYO 320 Event log ger
can sto re up to 10,000 events. Events are sto red in
chro no lo gi cal or der —star ting from the most re cent
event.
Each event pro vi des the fol lo wing in for ma tion:
Ø Ev. (Event num ber)
ØTYPE (e.g. Zone Alarm, Inva lid Code, etc.)
Ø IDENT (e.g. Zone num ber, Par ti tion, etc.)
ØAGENT (e.g. Key pad, Re a der, etc.)
Ø ID.AGEN (e.g. User code, Card/Key, etc.)
ØTIME (Time and Date of the event)
From the Instal ler menu:
KYO320
INSTALLER MENU
Event logger
1. Using A or B, se lect the Event log ger op tion, then
press ENTER.
EVENT LOGGER
from last..
To view all Events
Press the ENTER key to view all the Events in the Log -
ger —star ting from the most re cent (from last . . ).
Use A and B to scroll the Events.
Press D to view the Event de ta ils.
To view Events from a spe ci fic Date
Using A or B scroll for the fol lo wing prompt:
EVENT LOGGER
starting from..
Press the ENTER
prompt.
star ting from..
27/08/2002
Enter the re qui red Date (DD/MM/YYYY), then press the
ENTER key. Use A and B to scroll the Events.
Press D to view the Event de ta ils (see abo ve).
Ev.00033
Vie wing buffer
+
The di splay will show the de ta ils of each Event. For
exam ple, Tam per Events show the TYPE and
TIME only.
To Print Events from a spe ci fic Date
EVENT LOGGER
Print from..
Using A or B, scroll for the fol lo wing prompt:
+
You will not be able to se lect the Print from ... op -
tion if the Print Log ger op tion is ena bled (re fer to
"Print Log ger" un der "Con fi gu ra tion" in the
"PROGRAM PANEL" section).
Press the ENTER key, the di splay will show the Date
prompt.
Print from.
27/08/2002
Enter all the di gits of the re qui red Date (DD/MM/YYYY),
then press the ENTER key. The Key pad will exit the
INSTALLER MENU, and the Prin ter will print the Events
star ting from the en te red date to the most re cent.
KEYPAD OPERATIONS
key, the di splay will show the Date
TYPE
7