Program Panel; Configuration; Keypad - Bentel Security Kyo 320 Installation Manual

The Pro gram Pa nel op tion will al low you to pro gram all
the pa ra me ters which de ter mi ne system ope ra tion. Re fer
to "PROGRAMMING" in the INSTALLATION MANUAL
for the de scrip tion of the fol lo wing pa ra me ters:
Con fi gu ra tion:
And-Zone Gro ups
Zone
Out puts
Par ti tions
Keys/Card
Code types
Events-Actions
Events se tup
Te lep ho ne
Vo i ce mes sa ges
Te le ser vi ce
Options
Sche du ler op tions
From the INSTALLER MENU:
INSTALLER MENU
Even t logger
1. Using A or B, se lect the Pro gram Pa nel op tion.
INSTALLER MENU

Program Panel

2. Press ENTER.
INSTALLER MENU

Configuration

3.Using A or B, se lect the re qui red op tion. Re fer to the
re spec ti ve pa ra graph for the pro gram ming in struc tions.
To exit the PROGRAMMING menu, press ESC.
KYO320
PROGRAM PANEL
Configuration
The Con fi gu ra tion sec tion is di vi ded into dif fe rent pro -
gram ming sec tions: Key pads, Re a ders, Input ex pan -
ders, Out put ex pan ders, Po wer sta tions, Vec tor-RX
mo du le, Vox bo ard and Print Log ger:
INSTALLER MENU
Con fi gu ra tion
1.Press ENTER:
Con fi gu ra tion

Keypad

n Keypad
2. Press ENTER:
Keipad
Keypad
3. Using A or B, se lect the re qui red key pad , then press
ENTER.
De scri ption
Key pad
4. Enter the Key pad la bel "Edi ting a text" un der "Using
the Key pad"), then press ENTER.
Keypad
Present
5. Press ON to en rol the key pad (Pre sent), then press
ENTER. To unen rol a Key pad (de le te from the Con fi gu -
ra tion), press OFF.
+
You can not unen rol a key pad du ring the pro gram -
ming pha se. The va lu es shown on the di splay are
the cur rent va lu es in the Con trol pa nel memory.
Key pad
Memo
6. Using A or B, se lect Memo (re fer to "Memo") or
Part. Fast View (re fer to "Qu ick vie wing of Par ti tion sta -
tus") or Tamp./ Al. beep (re fer to "Tam per /Alarm
Beep") or Disp.pan.mem. or Disp.part.mem. or
EN50131 Comp (Com pa ti bi lity with EN50131) press
ON or OFF to ena ble or di sa ble the op tion con cer ned,
then press ENTER.
PROGRAM PANEL
N. 001
001
001
N. 001
N. 001
-
17