Release; Keypad; Re Set War Ning Lit Hium; Serial Ports - Bentel Security Kyo 320 Installation Manual

Expandable multifunction control panel
Hide thumbs Also See for Kyo 320:
Table of Contents

Advertisement

Release

The Re le a se op tion will al low you to view of the Con trol
pa nel fir mwa re re le a se. From the Instal ler menu:
INSTALLER MENU
Even t logger
1. Using A or B, se lect the Re le a se op tion.
INSTALLER MENU
Re lease
2. Press ENTER.
rev. fir mwa re:
KYO320 -
2.06
3. To go back to the Instal ler menu, press ESC.

keypad

The
key pad
op tion will al low you to test the key pad di -
splay, LEDs and buz zer.
From the Instal ler menu:
INSTALLER MENU
Even t logger
1. Using A or B, se lect the Test key pad op tion.
INSTALLER MENU
Keypad
2. Press ENTER:
Keypad
Language
3. Press ENTER:
1:<ITA>
2:ENG
3: ESP
4:FRA
is pos si ble to se lect the pro gram ming lan gua ges: en ter
the num ber which cor re sponds to lan gua ge and then
press ENTER.
Keypad
Language
4. Using A or B, to se lect:
Keypad
Test keypad
5. Press ENTER
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
KYO320
If the key pad di splay is ope ra ting pro perly, it will show
the let ters A to P on the top and bot tom line. If the LEDs
I, a, G and M are ope ra ting pro perly, they will blink
for se ve ral se conds. If the buz zer is ope ra ting pro perly,
it will emit three be eps.

Re set war ning lit hium

The Re set war ning lit hium op tion will al low you to cle -
ar the tro u ble si gnals ge ne ra ted by the RAM bat tery.
+
Under nor mal cir cum stan ces, the bat tery sho uld
last abo ut two ye ars, af ter which it must be re pla -
ced. This Con trol pa nel mo ni tors the bat tery life —
star ting from the last Re set Lit hium bat tery ope -
ra tion, but DOES NOT mo ni tor the battery charge.
From the Instal ler menu:
INSTALLER MENU
Even t logger
1.Using A or B, se lect the Re set war ning lit hium.
INSTALLER MENU
Re s.warn.lithium
2. Press ENTER:
INSTALLER MENU
The Key pad will in di ca te that the ope ra tion has been
ca ried out and then will go back to step 2.

Serial Ports

From the Instal ler menu:
1. Using A or B, se lect the Se rial Ports op tion.
INSTALLER MENU
Serial Ports
2. Press ENTER. The Key pad will show the BAUD
RATE va lue and, by me ans of an X, the pre sen ce of the
re spec ti ve Pa rity Bit. The first line will show the spe ed of
the se rial com mu ni ca tion bet we en the Con trol pa nel
and the lo cal PC. The se cond line will show the spe ed
of the se rial com mu ni ca tion bet we en the Con trol pa nel
and the PC used for re mo te Te le ser vi ce.
57600
1200
3. To go back to the Instal ler menu, press ESC.
KEYPAD OPERATIONS
Done!
x
x
15

Advertisement

Table of Contents
loading

Table of Contents