Default Pin - Bentel Security Kyo 320 Installation Manual

3. Enter the Over ti me length (in mi nu tes), then press
ENTER to go to the next pa ra me ter. Va lid en tries: 0
thro ugh 60 mi nu tes.
Max over ti me n.
(Max 009) 003
4. Enter the ma xi mum num ber of over ti me re quests al lo -
wed, then press ENTER to go back to the PROGRAMMING
menu. Va lid en tries: 0 thro ugh 9 re quests.
+
NOTE: The Over ti me length va lue mul ti plied by
the Max. over ti me re quests va lue MUST NOT ex -
ce ed 180 mi nu tes.
Option block 1
No_us.res.tamp.
Test_zone_dis.
Delay_bat.Test
No_ist.res.al.
No_key>leds_off
Bypass_z.tamp.
Test_bat.to_arm
Cont.recording
Option block 2
Block_inst.code
No_arm_z.open
Legal Time____
DTMF Voice menu
Logger on RS232
ZoneAlarmFlash
Chime in memory
Option block 3
Code Hierarchy
Tamp.OnExpInLoss
Tamp.OnKeyp.Loss
Realtime Chime
38
Corresponding option
Disable tamper memory reset
with User code
Maintain Zone Test Attribute
Enable dynamic battery test
timeout after mains restoral
Disable alarm memory reset
with Installer code
LEDs OFF on Readers
Bypass tamper on zone
Disable arming on battery
trouble
Enable continuous recording
Corresponding option
Lock Installer code
Disable arming on partition
alarm
Enable automatic changeover
Standard time/Summer time
Voice guide for commands
made over the phone
NOTE: This option is available
via Keypad only.
Shows open zones on the
keypad display
Shows Chime zones on the
Keypad display (memory)
Corresponding option
The user can choose whether to
enable the Installer code or not
Generates a Tamper
event if the Expander In
is not detected
Generates a Tamper
event if the Keypad
is not detected
Shows Chime zones on the
Keypad display (real time)
Disab.False Key
NoArmReceivLost
NoArm ZoneTroub
Ta ble 9 Key pad op tions and the ir cor re spon ding Com -
pu ter Sof twa re op tions

Default PIN

The Instal ler Code de fa ult PINs can be fo und in Ta ble 10:
Ø the no. co lumn shows the ID Num ber of the re spec ti -
ve Instal ler Code;
Ø the De scrip tion co lumn is for the la bel of the re spec -
ti ve Instal ler Code;
Ø the PIN co lumn shows the PIN of the re spec ti ve
Instal ler Code, if it is "Acti ve" and "Unhid den" (re fer to
the "Instal ler PIN" un der "KEYPAD OPERATIONS").
n. Description
196
197
198
199
200
Ta ble 10) KYO320 in stal ler code De fa ult PIN.
Disable false key event
Disable arming on wireless
receiver lost
Disable arming on wireless zone
fault
0196
0197
0198
0199
0200
KYO320
PIN