Changing The Prosthesis Setting Using The Cockpit App; Overview Of Adjustment Parameters In Basic Mode - Otto Bock Genium X3 3B5-2 Instructions For Use Manual

10.2.1 Changing the prosthesis setting using the cockpit app

Product
MyModes
Functions
Settings
Status
General
Manage components
Imprint/Info

10.2.2 Overview of adjustment parameters in basic mode

INFORMATION
When mute mode (silent mode) is activated, no beep and vibration signals are generated.
The parameters in basic mode describe the dynamic behaviour of the prosthesis in a normal gait cycle. These para­
meters act as basic settings for automatically adjusting the damping behaviour to the current motion situation (e.g.
ramps, slow walking speed, etc.).
The stance function, sitting function and/or stairs and obstacles function can also be activated/deactivated. Further
information on the stance function (see Page 30), sitting function (see Page 32), stairs and obstacles function (see
Page 32).
The following parameters can be modified:
Parameter
Resistance
Angle
Stance function
Sitting function
Genium X3 3B5-2/3B5-2=ST
1) Once the component is connected and in the desired mode, tap the
symbol in the main menu.
→ The navigation menu opens.
2) Tap the menu entry "Settings".
change
→ A list appears with the parameters for the currently selected mode.
3) Change the setting of the desired parameter by tapping the "<", ">"
2. Golf
symbols.
INFORMATION: The prosthetist's setting is marked and, after the
setting has been changed, can be restored by tapping the "Stand­
ard" button.
Adjustment soft­
ware range
120 – 180
55° – 70°
Deactivated
Activated
Deactivated
Activated
App/remote Meaning
control adjust­
ment range
+/- 10 Resistance against flexion motion e.g. when
walking down stairs or when sitting down
+/- 3° Maximum flexion angle in the swing phase
0 - deactivated Activation/deactivation of the stance function.
1 - activated For switching with the Cockpit app or remote
control, this function has to be activated in
the adjustment software. Further information
(see Page 30).
0 - deactivated Activation/deactivation of the sitting function.
1 - activated For switching with the Cockpit app or remote
control, this function has to be activated in
the adjustment software. Further information
(see Page 32).
Use
35