Combination Possibilities; Combination With An Osseointegrated Implant System; Application; Indications For Use - Otto Bock Genium X3 3B5-2 Instructions For Use Manual

Application

The microprocessor-controlled hydraulic unit offers the following advantages
• Approximation of the physiological gait pattern
• Stability while standing and walking
• Adaptation of product characteristics to various surfaces, inclines, gait situations and walking speeds

3.3 Combination possibilities

This product can be combined with the following Ottobock components:
Adapters
• 4R104=60 double adapter, sliding
• 4R104=75 double adapter, sliding
• 4R57, 4R57=ST rotation adapter
• 4R41 lamination anchor with pyramid receiver
• 4R43 lamination anchor with threaded connector
• 4R89 lamination anchor with pyramid adapter
Tube adapter
• AXON tube adapter: 2R19
Cosmetic cover/protector
• Genium X3 Protective Cover: 4X900
• Genium X3 Protective Cover: 4X193-1
Prosthetic feet
The maximum allowable patient weight depends on the foot size.
• 1C30 Trias
• 1D35 Dynamic Motion
• 1C40 C-Walk
• 1C60 Triton
• 1C61 Triton Vertical Shock
• Challenger: 1E95
• 1B1 Meridium
• 1C66 Triton smart ankle

3.3.1 Combination with an osseointegrated implant system

This product can be connected to a socket or to an osseointegrated, percutaneous implant system.
In case of connection to an implant system, verify that the manufacturer of the implant system and the manufactur­
ers of the corresponding exoprosthetic components/adapters also permit this combination. It must be ensured that
all indications/contraindications, the field of application, the conditions of use and all safety instructions are com­
plied with for the implant system, corresponding exoprosthetic components, corresponding adapters and for the
knee joint.
Among other things, this relates to the body weight, mobility grade, type of activity, load capacity of the implant and
bone anchoring, freedom from pain under functional load and compliance with the permissible ambient conditions
(see Page 46).
Please ensure that the qualified personnel applying the product is not only authorised for fitting this knee joint, but
also for the connection to the osseointegrated implant system.
4 Application

4.1 Indications for use

The product is to be used solely for lower limb exoprosthetic fittings.

4.2 Area of application

Area of application according to Ottobock's MOBIS classification:
10
• 4R111=N lamination anchor with threaded connect­
or
• 4R111 lamination anchor with pyramid receiver
• 4R116 lamination anchor with pyramid adapter
• Lamination anchor with pyramid receiver and
angled arm: 4R119
• 4R40 torsion adapter
• 4R118 adapter plate
• 1C62 Triton Harmony
• 1C63 Triton Low Profile
• 1C64 Triton Heavy Duty
• 1E56 Axtion
• 1E57 Lo Rider
• 1C10 Terion
Genium X3 3B5-2/3B5-2=ST