Combination Possibilities; Combination With An Osseointegrated Implant System - Otto Bock Kenevo 3C60 Instructions For Use Manual

Product description
• Smooth, harmonious, quiet initiation of the swing phase
• Automatic recognition of sitting down. Manual unlocking of the joint not required.
• Support while sitting down with individually adaptable resistance. This resistance remains constant during the
entire process of sitting down.
• Support while standing up. The knee joint can be loaded even before reaching full extension.
• Approximation of the physiological gait pattern
• Adaptation of product characteristics to various surfaces, inclines, gait situations and walking speeds
• Manual locking of the knee joint for use of a wheelchair (see Page 30). This function makes it possible to lock
the knee joint in any extended position while sitting down. This is particularly useful in order to keep the foot
from dragging on the ground when the patient is being transported in a wheelchair.

2.3 Combination possibilities

This product can be combined with the following Ottobock components:
Adapters
• Double adapter: 4R72=32
• Double adapter: 4R72=45
• Double adapter: 4R72=60
• Double adapter: 4R72=75
• Rotation adapter: 4R57, 4R57=*
• 4R89 lamination anchor with pyramid adapter
• 4R116 lamination anchor with pyramid adapter
• 4R41 lamination anchor with pyramid receiver
• 4R111 lamination anchor with pyramid receiver
• Lamination anchor with pyramid receiver and
angled arm: 4R119
AXON tube adapter
• AXON tube adapter: 2R17
• AXON tube adapter: 2R20
Cosmetic cover
• Foam cover: 3S26
Prosthetic feet
The maximum allowable patient weight depends on the foot size.
• Cosmetic light foot: 1G6
• Pedilan single axis foot, light: 1G9
• Single axis foot without toes: 1H32 or 1H34
(depending on the heel height)
• Single axis foot with toes: 1H38 or 1H40 (depend­
ing on the heel height):
• SACH foot with toes: 1S49, 1S66, or 1S67
(depending on the heel height and foot shape):
• SACH Foot with toes and abducted big toe: 1S90
+
• SACH foot: 1S101, 1S102, 1S103

2.3.1 Combination with an osseointegrated implant system

This product can be connected to a socket or to an osseointegrated, percutaneous implant system.
In case of connection to an implant system, verify that the manufacturer of the implant system and the manufactur­
ers of the corresponding exoprosthetic components/adapters also permit this combination. It must be ensured that
all indications/contraindications, the field of application, the conditions of use and all safety instructions are com­
plied with for the implant system, corresponding exoprosthetic components, corresponding adapters and for the
knee joint.
Among other things, this relates to the body weight, mobility grade, type of activity, load capacity of the implant and
bone anchoring, freedom from pain under functional load and compliance with the permissible ambient conditions
(see Page 34).
8
• Double adapter: 4R76
• Double adapter: 4R78
• 4R104=60 double adapter, sliding
• 4R104=75 double adapter, sliding
• 4R43 lamination anchor with threaded connector
• 4R111=N lamination anchor with threaded connect­
or
• 4R40 torsion adapter
• 4R118 adapter plate
• AXON tube adapter with torsion unit: 2R21
• Terion K2: 1C11
• 1D10 Dynamic foot
• Dynamic foot without adapter: 1D10
• 1D11 Dynamic foot (women)
• 1M10 Adjust
• 1A30 Greissinger plus
• Terion: 1C10
• 1C30 Trias
• 1D35 Dynamic Motion
Kenevo 3C60/3C60=ST