Combination Possibilities - Otto Bock C-Leg 3C98-3 Instructions For Use Manual

The microprocessor-controlled hydraulic unit offers the following advantages
• Approximation of the physiological gait pattern
• Stability while standing and walking
• Adaptation of product characteristics to various surfaces, inclines, gait situations and walking speeds
Essential performance of the product
• Stability in the stance phase

2.3 Combination possibilities

This product can be combined with the following Ottobock components:
Prosthetic hip joints
• Modular prosthetic hip joint: 7E7
• Monocentric prosthetic hip joint: 7E9
Adapters
• 4R104=60 double adapter, sliding
• 4R104=75 double adapter, sliding
• Rotation adapter: 4R57, 4R57=*
• 4R41 lamination anchor with pyramid receiver
• 4R111 lamination anchor with pyramid receiver
• 4R89 lamination anchor with pyramid adapter
Tube adapter
• 2R57 tube adapter
• 2R67 tube adapter with torsion unit
Cosmetic cover/protector
• Foam cover: 3S26
• 3F1=1 Functional cosmesis C-Leg
• 99B120=* Functional stocking
Prosthetic feet
The maximum allowable patient weight depends on the foot size.
• 1D10 Dynamic foot
• 1D11 Dynamic foot (women)
• 1M10 Adjust
• 1C10 Terion
• 1C11 Terion K2
• 1A30 Greissinger plus
• 1C30 Trias
• 1C30-1 Trias
• 1D35 Dynamic Motion
• 1C40 C-Walk
• 1C50 Taleo
• 1C51 Taleo Vertical Shock
• 1C52 Taleo Harmony
• 1C53 Taleo Low Profile
• 1C58 Taleo Side Flex
1
Note the Ottobock system height
INFORMATION
Calculating the Ottobock system height for the F22, VS2, FS5, RS2-00, RS2-K1 prosthetic feet
To calculate the Ottobock system height (e.g. for input in the adjustment software), the build height according to
the technical data for the listed prosthetic feet has to be reduced by about 18 mm.
Example: The build height of the "F22" prosthetic foot in size 26 is 117 mm.
Therefore, the system height is: 117 mm – 18 mm = 99 mm. This is only a reference value. Therefore, measure
and verify the distances on the patient before shortening the tube adapter.
C-Leg 3C98-3/3C88-3
3D
• Helix prosthetic hip joint: 7E10
• 4R116 lamination anchor with pyramid adapter
• 4R43 lamination anchor with threaded connector
• 4R111=N lamination anchor with threaded connect­
or
• 4R40 torsion adapter
• 4R118 adapter plate
• 4X860=* C-Leg Protective Cover (w/o shield)
• 4P862 C-Leg guard
• 4P863* Shield Insert
• 1C60 Triton
• 1C61 Triton Vertical Shock
• 1C62 Triton Harmony
• 1C63 Triton Low Profile
• 1C64 Triton Heavy Duty
• 1C68 Triton side flex
• 1E56 Axtion
• 1E57 Lo Rider
• 1B1 Meridium
• 1B1-2 Meridium
• 1A1-2 Empower
• F22 Maverick Comfort AT
1
• VS2 Promenade
1
• FS5 Thrive
1
• RS2-00 Runway , RS2-K1 Runway HX
Product description
1
1
11