Parameters
Private Password
Parameters
sysName
sysContact
sysLocation
Parameters
Host
SNMP Trap Port
Authentication
String
SNMP Test
4.3.5
Syslog
Remote Power Manager will send out text message to syslog receiver (syslog server). Please do as
follows:
For private password, use DES. Select DES type to key-in password.
The name displayed on SNMPAgent.
The contact displayed on SNMPAgent.
The location displayed on SNMPAgent.
The Host IP address of SNMP Trap.
The phase connects to SNMP Trap. Default is 162.
The authentication string to access SNMP Trap.
After setting up the above info, you can send a test mail to make sure
this function is normal.
50
-
-
IP-based 4/8-port Switched Power Manager Power
Description
Description
Description
IPM-4220 / IPM-8220