Appendix A: Resetting To Default Via Reset Button - Planet IPM-4220 User Manual

Appendix A: Resetting to Default via Reset
Users who forget the network account and password of the product can press "Reset" to recover to the
factory default values, and the device will reboot at the same time.
Step 1. Press and hold "RESET" for more than 3 seconds. When LED starts flashing, release the hold.
You are then asked fill out the admin account and password as admin (add a new account if no
admin account).
server, the device IP should be preset as 192.168.0.10). The acquired IP is displayed on
theLCD panel.
Step 2. Press and hold RESET for more than 10 seconds. When LED is on, release "RESET" to clear
all the data of the device.
Default DHCP Client
Default IP Address
Default Port
Default Login User Name
Default Login Password
Search Tools
Button
Device IP will be automatically acquired through DHCP (if there is no DHCP
On
192.168.0.10 – if no DHCP existed in the network
80
Set itself
Set itself
ip_search
74
-
IP-based 4/8-port Switched Power Manager Power
-
IPM-4220 / IPM-8220