Planet IPM-4220 User Manual page 36

Parameters
Move the mouse over the icons for its detailed information, and the
menu is displayed as follows:
Refer to the temperature value detected by the current temperature
Temperature
sensor.
This drop-down list offers four states for inquiry: "All", "Abnormal",
State dropdown
"Alert", and "Normal" that will be displayed as per the temperature
menu
sensor state.
Name: Temperature sensor name
High
higher than you set, the alarm will occur.
Low
lower than you set, the alarm will occur.
Offline
Setup higher than you set, device will send alerts via email.
Device
High
Device Temp
higher than you set, the alarm will occur.
Low
lower than you set, the alarm will occur.
IP-based 4/8-port Switched Power Manager Power
Description
than "Low Alarm" setting.
Non-Monitor Alert:
external temperature is higher than "High Alarm" or lower
than "Low Alarm" setting.
Non-Monitor Off-line:
Temperature Probe is not connected to device now.
Alarm: Set up the values of high temp alarm. When temp is
Alarm: Set up the values of low temp alarm. When temp is
Monitor: Check to enable to monitor system. When temp is
Temp: Such device temperature.
Alarm: Set up the values of high temp alarm. When temp is
Alarm: Set up the values of low temp alarm. When temp is
36
- -
IPM-4220 / IPM-8220
"Offline Monitor" is not checked. And
"Offline Monitor" is not checked.