Planet IPM-4220 User Manual page 29

Parameters
Name Description of each power infeed.
Each light signal has three states: "Normal", "Alert" and "No Access".
temperature is not higher than "High Alarm" or lower than "Low
Alarm" setting.
temperature is higher than "High Alarm" or lower than "Low Alarm"
setting.
the infeed.
Status
Move the mouse over the signal light for its detailed information, and
the menu is displayed as follows:
Total Display the total current consumption of the device.
Voltage Display the voltage of the current input power.
Power Display the consumption power value of the current input power.
Frequency Display the voltage frequency of current input power.
Power factor Display the power factor of current input power.
Display the consumption watt-hour of the device since the last
KWh
zeroing.
It provides four methods for users to check up infeed status: All,
State dropdown
abnormal, warning and normal. Relevant info would show as
menu
correspondence event has been chosen.
Press "Setup" and the window for setting the input power of this
Setup
circuit will be shown.
IP-based 4/8-port Switched Power Manager Power
Description
Monitor Normal: "Offline Monitor" is checked. And external
Monitor Alert: "Offline Monitor" is checked. And external
No Access: Means user does not have any authority to operate
29
- -
IPM-4220 / IPM-8220