Parameters
Data Rate
Data
Parity
Stop Bits
4.3.7
Peripheral Parameters
This menu is mainly for setting current, tolerance ranges of temperature and humidity, power statistics
and probe as well as the panel operating, etc.
operate the device through terminal program
API:
Other devices can operate the current device through API
protocol. As for the use of API, please refer to the appendix
API
protocol.
UPS:
Enable this when the device is to be connected with UPS to
monitor UPS information.
When the type selected is UPS, the following window will be
displayed; press "search" to search the device after selecting the
"type".
Daisy Chain:
When the device is to be concatenated with the other
IPM to link with the power outlet, please enable this; as for the usage
and limitations of Daisy Chain, please see 2.2 Product
Concatenation.
Set UART Bob rate parameter.
Set UART bit parameter.
Set UART Parity Check parameter.
Set UART stop bit parameter
52
-
-
IP-based 4/8-port Switched Power Manager Power
Description
IPM-4220 / IPM-8220
UART