Remote Syslog - Planet WGS-4215-T User Manual

4.2.6.3 Remote Syslog

Configure remote syslog on this page. The Remote Syslog page allows you to configure the logging of messages that are sent
to syslog servers or other management stations. You can also limit the event messages sent to only those messages below a
specified level.
The Remote Syslog screens in
The page includes the following fields:
Object
• Server Address
• Server Port
• Severity
Figure 4-2-16 & Figure 4-2-17
Figure 4-2-16 Remote Log Target Page Screenshot
Description
Provide the remote syslog IP address of this switch.
Provide the port number of remote syslog server.
Default Port no.: 514
The severity of the local log entry. The following severity types are supported:
emerg: Emergency level of the system unstable for local log.

alert: Alert level of the immediate action needed for local log.

crit: Critical level of the critical conditions for local log.

error: Error level of the error conditions for local log.

User's Manual of WGS Managed Series
appear.
76