Planet IPM-4220 User Manual page 34

IP-based 4/8-port Switched Power Manager Power
IPM-4220 / IPM-8220
Parameters Description
Displays the current power outlet on-off state. For operation of power
Switch outlet on/off, click the on/off icon with the mouse for commands of
"On", "Off", and "Reboot".
To be displayed after concatenation is enabled is the power outlet of
Sync Port this line that will be linked with the outlet displayed in the Sync Port of
concatenated device.
To operate many switched IPM at once, please follow these steps:
Step 1. Mark on the checkbox of switches or All that you want to
operate.
All
Step 2. Select the action you want (ON, OFF, REBOOT or SHORT
ON).
Step 3. Click Confirm to control the switch you select.
Press Setup and the following window will appear, and users can set
the outlet power, safe shutdown, work schedule, auto-ping,
Setup
monitoring, parameter and copy. Please refer to the 4.2 Outlet
Power Setup for more understanding.
You may Add, Delete, Modify the group and also assign them with
special switch. Descriptions are shown below:
Select: You may select existing groups for deletion and revision from
the drop-down list.
Group Management
Delete Group: Delete the group user that is not necessary.
Add Group: Press Add Group to create a group. After clicking it, Add
Group window will pop up. Enter group name and mark the ports you
expect to manage, and press Add to build the group, continuously
adding is permitted here. Press Cancel to return to main tab.
34
- -