Snmp - Planet IPM-4220 User Manual

4.3.4

SNMP

You can set up SNMP Agent and SNMP Trap on this page.
Parameters
SNMP v1/v2 Enable
SNMP Port
Read Community
SNMP Writing
Write Community
Parameters
SNMP v3 Enable
User Name
Type
Authorization Type
Authorization
Password
Private Type
Enable SNMP v1/v2.
Set the destination port. Default is 161.
Key-in passwords in the Community Name field. Default is public.
Select the checkbox to enable SNMP Write-in.
Key-in passwords in the Community Name field. Default is private.
Enable SNMP v3.
The name is SNMP v3 command.
There are two types: Read Only, Read and Write.
There are two types: MD5 and SHA.
The password of authorization type. Use MD5 or SHA.
There are two types: No and DES.
49
- -
IP-based 4/8-port Switched Power Manager Power
Description
Description
IPM-4220 / IPM-8220