Parameters
4.3 System
On this web page, users can set Network, Email server, Message server, SNMP, SysLog, Peripheral
parameters, and other relevant data.
4.3.1
Network Setting
This menu is mainly for setting the basic data of network.
Parameters
Enabled DHCP
Host
Subnet Mask
Gateway
MAC
Ping Test
Press "Save" after selecting a single power outlet or selecting all to
copy the selected outlet parameters to the clicked power outlet(s).
Use checkbox to enable DHCP. It will assign IP address.
Assign the Network IP address for the power switch.
Set up the subnet mask info of this equipment.
Set up the gateway port of this equipment.
Display MAC address.
Confirm whether the device with the IP address or DNS name is
connected to the network.
44
-
-
IP-based 4/8-port Switched Power Manager Power
Description
Description
IPM-4220 / IPM-8220