Outlet (For Ipm-4220) - Planet IPM-4220 User Manual

Parameters
4.1.2

Outlet (For IPM-4220)

Display PC connected with device statement and switch info; power on/off can be directly operated on
the menu.
Parameters
Name
PC
Name: Description of each power infeed.
Overload Current: Input the current value of the overload power;
alarms will be given when the input power current exceeds this alarm
value.
High Alarm: Set up the values of high infeed alarm. When current is
higher than you set, the alarm will occur.
Low Alarm: Set up the values of low infeed alarm. When current is
lower than you set, the alarm will occur.
Voltage: Set the input power voltage, and when the device has no
watt-hour module, this value will be taken as computing power and
relevant information.
If user has no access to this route after signing in, the name will be
"No Access".
When the power outlet connects with a computer, in order to allow
the computer to shut down normally before powering off, the
computer must be installed and execute a safe shutdown program
(Please go to PLANET website to download this program). After
relevant parameters are set, safe shutdown program will be
30
- -
IP-based 4/8-port Switched Power Manager Power
Description
Description
IPM-4220 / IPM-8220