Parameters
RH
State dropdown
menu
Setup
4.1.6
Daisy Chain
Display another connected switched IPM and status.
Monitor
Off-line:
Probe is not connected to PDU now.
Non-Monitor
Normal:
external humidity is not higher than "High Alarm" or lower
than "Low Alarm" setting.
Non-Monitor
external humidity is higher than "High Alarm" or lower than
"Low Alarm" setting.
Non-Monitor
Humidity Probe is not connected to device now.
Move the mouse over the icons for its detailed information, and the
menu is displayed as follows:
Refer to the humidity value detected by the current humidity sensor.
This drop-down list offers four states for inquiry: "All", "Abnormal",
"Alert", and "Normal" that will be displayed as per the temperature
sensor state.
Name: Humidity sensor name
High RH
Alarm: Set up the values of high RH alarm. When humidity
is higher than you set, the alarm will occur.
Low RH
Alarm: Set up the values of low RH alarm. When humidity is
lower than you set, the alarm will occur.
Offline Monitor:
Check to enable to monitor system. When humid is
higher than you set, device will sent alerts via email.
38
-
-
IP-based 4/8-port Switched Power Manager Power
Description
"Offline Monitor" is checked. Humidity
"Offline Monitor" is not checked. And
Alert:
"Offline Monitor" is not checked. And
Off-line:
"Offline Monitor" is not checked.
IPM-4220 / IPM-8220