Monitor (Only For Ipm-8220); Peripheral - Planet IPM-4220 User Manual

Parameters
Re-Ping time (Min.)
4.2.5

Monitor (Only for IPM-8220)

This function provides the ability to set power outlet current value, real-time off of power outlet in case
of any current abnormality to avoid any damage to the devices connected with the outlet.
Parameters
Overload
High alarm
Low alarm
4.2.6

Peripheral

You may set up peripheral at this tab to monitor device and command it with On, Off, Reboot and Short
on; set up different conditions with different peripheral types.
Parameters
Name
Operation type
SNMP Trap name
Monitor
The delay time for re-executing PING detection when the network
device is on after network device reboots.
Current value of the overload power, alarms will be given when the
input power current exceeds this alarm value.
Current value to be alerted when the power outlet current is too high.
Current value to be alerted when the power outlet current is too low.
Add peripheral name.
As the peripheral matches, it would perform the action for On, Off,
Reboot or Short on.
The Name shows up when sending alarm. English and number are
only accessible.
Check this item and the system would perform peripheral monitoring.
42
- -
IP-based 4/8-port Switched Power Manager Power
Description
Description
Description
IPM-4220 / IPM-8220