Table of Contents
Advertisement
5.4.5 System Event Log
This page allows the user to decide whether to send the system event log, and select the mode which the system event
log will be sent to client only, server only, or both client and server. What kind of event log will be issued to the
client/server depends on the selection on the Event Configuration tab. There are five types of event available to be
issued as the event log.
Device Cold Start
Device Warm Start
Authentication Failure
X-Ring Topology Change
Port Event
5.4.5.1 Syslog Configuration
The System Logs enable viewing device events in real time, and recording the events for later usage. System Logs record
and manage events and report errors or informational messages
Figure 5-11 Syslog Configuration interface
44
User's Manual of ISW-1022M
Advertisement
Table of Contents
