Planet IPM-4220 User Manual page 18

power switch control and IP; set alarm current
Buzzer
14
Alarm Indicating Light
15 Lights remaining lit: Alarm has occurred
Slow flashing: There is current overloading
16 Power Outlet Indicating Light
IPM-8220 Current Panel Operation
When the LCD panel only displays figures and the sign of "A (AMP)", it means total current. Switch
with the Set button to show the following sequence:

LCD menu shows total current and current values of branch 1 and branch 2.  Hold the Set
button for 3 seconds (until a long beep is heard) to enter alarm current setting.  Enter flash
mode (LCD will flash after entering setting mode; "S" and "W" will display at the bottom of LCD).
 Press the Set button to increase the alarm current by 0.5A in each press.  Hold the Set
button for 3 seconds ( until a "beep" is heard) to save the setting.
IP-based 4/8-port Switched Power Manager Power
18
- -
IPM-4220 / IPM-8220