Product Overview; Introduction - Siemens SINAMICS G120 Operating Instructions Manual

Product overview

2.1

Introduction

The SINAMICS G120 Smart Access is a Wi-Fi based Web server module and an engineering
tool. It has been designed for quick setup, parameterization, and diagnostics of the supported
SINAMICS G120 converter or SINAMICS G115D converter.
The SINAMICS G120 Smart Access can be mounted to the supported converter, thus realizing
Web-based access to the converter from a connected device (a conventional PC with a
wireless network adapter installed, a tablet, a laptop, or a smart phone).
Note
SINAMICS G120 Smart Access is only for commissioning and thus cannot be used with the
converter permanently.
Supported devices
The SINAMICS G120 Smart Access automatically recognizes the following devices from the
SINAMICS range:
Devices
G120X/G120XA
G115D
G120C
G120 CU230P-2/CU240E-2/CU250S-2
SINAMICS G120 CU250S-2 does not support quick setup with the
1)
SINAMICS G120 Smart Access.
SINAMICS G120 Smart Access
Operating Instructions, 12/2020, A5E43332487-004
Supported converter firmware version
FW 1.0 or later
4.7 SP13 or later
4.7 SP6 or later
1)
2
9