DigiDesign D-show Manual page 89

Copying Assignments Between Aux Busses
and Variable Group Busses
You can copy the current input assignments from one Aux
bus or Variable Group bus to another bus of either type. If the
busses are linked, assignments can be copied from other
linked busses. This lets you quickly duplicate monitor mixes.
Copying Aux or Variable Group bus assignments
overwrites all the assignments on the destination
Aux or Variable Group bus.
To copy input assignments between Aux/Variable Group busses:
Target the Aux bus or Variable Group bus that you want to
1
be the destination of the copied assignments by selecting its
on-screen channel strip.
Click the Input Assign pop-up menu at the bottom of the
2
Members list, choose Replace With Mix From, then choose the
Aux bus or Variable Group bus whose assignments you want
to copy to the currently selected bus.
Click the Input Assign pop-up menu at the bottom of the
3
Members list, choose Replace With Mix From, then choose the
Aux bus or Variable Group bus whose assignments you want
to copy to the currently selected bus.
Copying input assignments between Aux busses
Copying Mains Assignments to Aux Busses
and Variable Group Busses
You can copy the current Main bus assignments to Aux busses
and Variable Group busses, which lets you build monitor
mixes from a main mix. Assignments to the Main Left/ Right
busses can be copied to linked Aux or Variable Group busses,
and assignments to the Center/Mono bus can be copied to
mono Aux or Variable Group busses.
To copy bus assignments from the Mains to Auxes or Variable
Groups:
Target the Aux bus or Variable Group bus that you want to
1
be the destination of the copied assignments by selecting its
on-screen channel strip.
Click the Input Assign pop-up menu at the bottom of the
2
Members list, choose Replace With Mix From, then choose the
available Main bus (Left-Right or Mono) whose assignments
you want to copy to the currently selected bus.
The state of the Aux or Variable Group controls follows the
state of the corresponding controls on the Input Channels as-
signed to the Mains: Channel Mute maps to Bus Send, Chan-
nel Pan maps to Bus Pan, and Channel Fader level maps to Bus
Send level.
Chapter 10: Auxes and Variable Groups 79