Assigning Hardware Inserts From The Patchbay - DigiDesign D-show Manual

Assigning Hardware Inserts from the
Patchbay
To assign a hardware insert from the Patchbay:
Go to the Patchbay and click the Inserts tab.
1
In the Inserts page of the Patchbay, click Channels, FX Re-
2
turns, or Outputs tab.
Click in the channel grid to assign the insert input/output
3
number (listed across the top) to the channel where you want
to assign the insert (listed on the left).
Assigning a hardware insert in the Patchbay Inserts page
The Patchbay Inserts page shows the name of the channel and
its destination at the current cursor location. The Insert loca-
tion is also displayed in the Inserts section in the Inputs or
Outputs page.
Chapter 18: Hardware Inserts 135