Mute Groups - DigiDesign D-show Manual

Muting the Main Busses
The mute status of the Main busses is controlled from the
Mute switch above the Mains Fader.
To control the mute status of the Main busses:
Press any combination of the Left, Right, or Center/Mono
1
switches to assign control of the corresponding busses to the
Mains Fader.
Press the Mute switch in the Global Master section to toggle
2
the mute status of the assigned busses.
Left
Mute
Main Bus controls and Mute switch
Flashing Mute Indication
A flashing Mute switch indicates the channel is implicitly
muted as a result of a Solo or Mute Group activation.
Solo In Solo In Place mode, when a channel is soloed, all other
channels that are not soloed or solo safe are implicitly muted.
Mute Group Members of a mute group are implicitly muted
and flash when the mute group is active.

Mute Groups

D-Show lets you assign channels to any of 8 available Mute
Groups. Mute Groups let you mute and unmute multiple
channels simultaneously by pressing a single switch.
Any type of channel, including all Input Channels and all
Output channels, except VCAs, can be assigned to Mute
Groups.
112 D-Show Guide
Safe
Select
Center/Mono
Right
Mute Groups only affect the status of channel Mute switches,
and do not affect the on/off status of Aux Sends, output of the
Talkback/Oscillator section, or the routing of signals to the
monitor outputs.
Assign
Mute Groups 1–8
Mute Groups section
Defining Mute Groups
Mute Groups can be defined from the Mute Groups section on
the control surface or from on-screen. Any mixture of channel
types can be assigned to a Mute Group. Channels can be as-
signed to more than one Mute Group.
To assign channels or remove channels from a Mute Group:
Press the Assign switch in the Mute Groups section. The As-
1
sign switch flashes to indicate Assign mode.
Press the Mute Group switch (1–8) for the group where you
2
want to assign or remove a channel. This switch flashes to in-
dicate the group is targeted for assignment.
Press the Select switch for each channel you want to assign
3
or remove from the Mute Group. The Select switches on the
selected channels flash.
Do one of the following:
4
• To confirm the Mute Group definition, press the flashing
Assign switch or the flashing Mute Group switch.
– or –
• To cancel the Mute Group definition, press the Cancel
switch in the Function section.
Show Members
Disable