Simulating A D-Show Configuration; Transfer And Filing Quick Start - DigiDesign D-show Manual

Removing the Standalone Software
To remove the D-Show Standalone software:
Launch the Add/Remove Programs Control Panel.
1
Choose Digidesign D-Show, then follow the instructions
2
on-screen.
Simulating a D-Show Configuration
You can use the Standalone software to simulate a D-Show
system with any number of input and outputs. The corre-
sponding inputs and outputs become available in the Patch-
bay, allowing you to prepare a show that can transfer directly
to the destination system.
To simulate a D-Show system:
Launch the Standalone software.
1
Go to the Options page and click the Devices tab.
2
Right-click the Stage Rack graphic and choose the number
3
of Input and Output cards on the destination system.
Adding Stage Rack inputs and outputs
Right-click the FOH Rack graphic and add an IOx Option or
4
Pro Tools recording/playback option if they are present on the
destination system.
Adding FOH Rack inputs and outputs
178 D-Show Guide

Transfer and Filing Quick Start

The basic steps for using the Standalone software and data
transfer are as follows:
• Save data to disk, then transfer it to an external USB storage
device.
• Transfer data from the USB device, then load the data.
For complete instructions on transferring data, see
Chapter 20, "Shows and File Management"
Save and Transfer Data from a
D-Show System
To save and transfer data from the complete system:
Connect a USB storage device to a D-Show USB port.
1
Use the Save tab of the Filing page to save D-Show data to
2
disk.
Go to the Filing page and click the Transfer tab.
3
Do one of the following to select the type of data to transfer:
4
• To transfer all data, click the Console icon.
• To transfer Console Settings, click the Settings icon.
• To transfer Show Folders, click the Show Folders icon.
• To transfer individual Shows, click the Shows icon.
• To transfer Preset Folders, click the Preset Folders icon.
• To transfer Presets for individual items, click the Built-In
icon or the Plug-In icon and choose a processor or
plug-in from the pop-up menu.
In the left column, select the items you want to transfer
5
from D-Show to the portable storage device.
Transferring Show files from D-Show
Click the Transfer button.
6