Snapshot Options - DigiDesign D-show Manual

Snapshot Options

Crossfade Time
You can set the X-fade (crossfade) time for the channel faders
between snapshots from 0–10 seconds, in 0.1 second incre-
ments. This value determines the fade-in time, or the time it
takes for the faders to move to their new positions when a
snapshot is recalled. D-Show performs a linear crossfade in the
specified time.
All other controls are unaffected by the crossfade time, and are
updated instantly when a snapshot is recalled. Each snapshot
may be assigned its own crossfade time.
Default Crossfade Time
The default crossfade time assigned to new snapshots can be
set with this option, with a possible range of 0–10 seconds.
To set the Default Crossfade Time:
Go to the Options page and click the Snapshot tab.
1
Under Snapshot General Preferences, enter a value or drag
2
in the text box and press Enter.
Setting the Default Crossfade Time
Pre Settings
Snapshots can be used to recall the preamplifier settings on
the Stage Rack inputs for all scoped Input Channels. You can
set any of the following Pre parameters to be recalled by the
Pre data type button: Gain, Pad and Phase, Delay, +48V (Phan-
tom Power), and HPF (High-Pass Filter).
To set the Pre parameters recalled by the Pre Data Type button:
Go to the Options page and click the Snapshot tab.
1
Under Pre, select the options you want to include. Selected
2
items will be affected when the Pre data type is included in the
scope of a snapshot.
Setting Pre parameters
Classifying Auxes and Variable Groups
You can classify Aux Sends and Variable Group Sends as
monitor sends ("Mon") or as effects sends ("FX"), which lets you
scope each type separately from the Snapshots page.
This option is only a means of organizing Aux Sends for
snapshot control, and does not directly affect Aux bus or
Variable Group bus operation.
To classify Aux Sends and Variable Groups for snapshot scope:
Go to the Options page and click the Snapshots tab.
1
For each Aux Send or Variable Group bus or bus pair, click
2
the "Aux Mon" or "Aux FX" buttons to classify it as a monitor
send or effects send, respectively.
Classifying Aux Sends and Variable Groups
Aux Pre/Post State
Select this option to include the pickoff point pre-fader or
post-fader state of each Aux Send or Variable Group in snap-
shots.
Chapter 21: Snapshots 171