Simulating A Venue Configuration; Transfer And Filing Quick Start - DigiDesign VENUE Profile Manual

Simulating a VENUE Configuration

You can use the Standalone software to simulate a VENUE sys-
tem with any number of input and outputs. The correspond-
ing inputs and outputs become available in the Patchbay, al-
lowing you to prepare a show that can transfer directly to the
destination system.
To simulate a VENUE system:
Launch the Standalone software.
1
Go to the Options page and click the Devices tab.
2
Right-click the console graphic and choose the type of con-
3
sole you will be working with.
Right-click an I/O graphic and choose the type of I/O (as
4
available) and specify the number of Input and Output cards
on the destination system.
Adding Stage Rack inputs and outputs
218 VENUE Profile Guide

Transfer and Filing Quick Start

The basic steps for using the Standalone software and data
transfer are as follows:
• Save data to disk, then transfer it to an external USB storage
device.
• Transfer data from the USB device, then load the data.
For complete instructions on transferring data, see
Chapter 20, "Shows and File Management."
Save and Transfer Data from a
VENUE System
To save and transfer data from the complete system:
Connect a USB storage device to a VENUE USB port.
1
Use the Save tab of the Filing page to save VENUE data to
2
disk.
Go to the Filing page and click the Transfer tab.
3
Do one of the following to select the type of data to transfer:
4
• To transfer all data, click the Console icon.
• To transfer Console Settings, click the Settings icon.
• To transfer Show Folders, click the Show Folders icon.
• To transfer individual Shows, click the Shows icon.
• To transfer Preset Folders, click the Preset Folders icon.
• To transfer Presets for individual items, click the Built-In
icon or the Plug-In icon and choose a processor, plug-in or
Input Channel Presets item from the pop-up menu, or
click the Scope Sets icon.
In the left column, select the items you want to transfer
5
from VENUE to the portable storage device.
Transferring Show files from VENUE
Click the Transfer button.
6