Groups View - DigiDesign C24 Manual

In Expanded Mic Pre view, the following con-
trols are shown in the LCD displays:
• Gain: controlled by the encoder
• Source: chosen with the encoder
• Impedance: chosen with the encoder (for
Mic/Line source only)
• Pad: toggled with the encoder switch
• Polarity: toggled with the encoder switch
• Phantom Power: toggled with the encoder
switch
• High-Pass Filter: toggled with the encoder
switch
• Insert: toggled with the encoder switch
To open the Mic Pre window for the track:
Hold the Ctrl/Win Modifier switch and press
the encoder switch that corresponds to "Mic
Pre."
To exit Expanded Mic Pre view, do any of the
following:
Press the lit Mic Pre switch in the view section.
Press the encoder switch that corresponds to
"Mic Pre."
Enter another view.

Groups View

C|24 lets you show Pro Tools Mix/Edit groups in
the LCD displays, and create, enable, modify
and delete groups from the control surface.
Displaying Group Membership of Tracks
You can set C|24 to show the Group ID of tracks
along with their track names in the LCD dis-
plays. See the description of the Track Display
option in "Console Preferences" on page 47.
Creating Groups
To create a group:
Select the tracks you want to include in the
1
group.
Press the Create switch in the Groups section.
2
Current groups are shown in the LCD displays,
with the group ID in the top row, and the group
name in the bottom row.
Select the Group ID for the new group by
3
pressing the corresponding encoder switch.
Enter a name, select a type, and set attributes
4
for the group.
Press Enter to confirm the new group.
5
When you are finished creating groups, press
6
the flashing Create switch.
Enabling and Suspending Groups
To enable or suspend a group:
Press the Enable switch in the Groups section.
1
Current groups are shown in the LCD displays,
with the group ID in the top row, and the group
name in the bottom row.
Enabled groups are indicated by lit encoder
switches.
Suspended groups are indicated by flashing
encoder switches.
Press encoder switches to enable or suspend
2
the corresponding groups.
When you are finished enabling groups, press
3
the flashing Enable switch.
Chapter 8: Operating Views and Modes 83