Contact Partner In Case Of Problems - Unify OpenScape Key Module 400 User Manual

Option 2. Cause:
When "Delete LED support" is shown in the menu:
You have tried to save a number without an LED display or an external number
for a key with an already stored internal call number with LED display.
Possible response:
Confirm the "Delete LED support" option shown to save the number. The exis-
ting internal call number remains on the other level without an LED display.
Pressed key does not respond:
Check if the key is stuck.
Phone does not ring when called:
Check whether the "Do not disturb" function is activated on your phone (Do not
disturb icon is in the status bar of the display screen
te the "do not disturb" function.
To correct any other problems:
Contact your administrator first if a fault persists for more than five minutes, for
example. Pass on the message displayed in the red field, if appropriate, as
shown in the next example. Problems that cannot be corrected should be refer-
red to Customer Service.
Tuesday 17 Nov. 2015
No telephony (RF2)

Contact partner in case of problems

Contact your administrator if a fault persists for more than five minutes, for ex-
ample.
Conversations
Service/Settings
Forwarding on
159
page 22). If so, deactiva-
