User Password - Unify OpenScape Key Module 400 User Manual

120
Service/Settings
$ User:
-
if nec.
Changing the user password -
Current password
K
©
****** Q
New password K
©
****** Q

User password

Your User password protects your user settings. You can also use the User
password to fully lock your telephone
The administrator may have configured the following settings:
• The password is deactivated: You do not have the option of configuring user
settings. The message "Password is deactivated" is displayed.
• The password is temporarily locked: You do not have the option of configuring
user settings at this time. The message "Password is blocked" is displayed.
• After initially logging on to a user area, you may have to replace the default
password with a new password.
• A password can have a predefined period of validity: You will have to create a
new password when the period ends. The message "Change password (x
days left)" will alert you to this at the appropriate time. The message "Pass-
word has expired" appears when the validity period has expired. Confirm "Ch-
ange password" and change the password as described in this section.
• If you repeatedly enter the wrong password (2 to 5 times), additional attempts
are blocked. You can make another attempt after a predefined time.
• It is possible that you will not be able to re-use a previously used password for
a period of time, which means you have to create another "new password".
• Your administrator can tell you about the rules for what and how many charac-
ters can or must be used in the password.
The preset password "000000" corresponds to a blank password. In other
words, the phone cannot be locked and the user menu is not password
protected (see also
z
You can also configure this setting via the Web interface
@
If nec. Press Main Menu key.
Open using the Softkey
_
Open using the Softkey.
_
j
Enter and confirm the User password.
€
Select "Changing the user password".
Open using the Softkey
_
Open using the Softkey
_
The input field is displayed.
_
j
Enter the current password and conclude your input with the Softkey.
Open using the Softkey
_
The input field is displayed.
_
j
Enter the new password (at least 6 characters) and conclude your input with the
Softkey.
page 122.

page 121).

page 155.
