Programming Function Keys; Function Keys Setup - Unify OpenScape Key Module 400 User Manual

Assign telephone function -
Change key
Calls -
Release key
Key labeling
change
save

Programming function keys

Your can assign to the keys of your OpenScape Desk Phone CP400 or
OpenScape Key Module 400 frequently used functions, numbers or services.
On the second level you can only save destination phone numbers.
The keys can be programmed in three ways:
• Hold selected key for a long period
• Call up using Service menu
• Call up via user settings
The following is a description of the set up through holding a selected key.

Function keys setup

See also the information in
Example: "Disconnect key" set up
Hold down the Function keys of the phone or of the OpenScape Key Module
_
400, which is to have a function assigned to it, until the Key Programming Menu
is displayed.
€
Select "Assign telephone function"
Confirm.
_
_ Confirm.
€
Select "Calls:"
Confirm.
_
Confirm. The key is programmed.
_
You can also change the default key label.
See also the notes on
€
Select "Key labeling"
Confirm.
_
Confirm.
_
j
Change text.
_ Confirm to save input.
page 41.

page 160.

65