Forwarding Calls For Lines - Unify OpenScape Key Module 400 User Manual

104
Service/Settings
Service menu -
Destinations
-
Trunk MULAP on
Fwd. MULAP
-
Ln.
-
1=all calls
2=external calls only
3=internal calls only
save
Fwd. MULAP
-

Forwarding calls for lines

You can immediately forward internal and/or external calls to your lines to diffe-
rent internal or external phones (destinations).
If you activate call forwarding for a line, this shall apply to all line/trunk keys of
your group for this line.
@
If nec. Press Main Menu key.
_ Open using the Softkey.
Open with softkey.
_
Open with softkey.
_
€
Select "Trunk MULAP on".
_ Confirm.
or
_ If available, press the key. (You have incompletely saved the "Fwd. MULAP" key
without type and destination of the forwarding
Press desired line/trunk number.
_
or
j
Enter and confirm the desired line/trunk number.
Confirm.
_
or
€
Select "2=external calls only".
Confirm
_
or
€
Select "3=internal calls only".
_ Confirm.
j
Enter destination phone number.
Confirm.
_
or
If available, press the key. (You have also saved the type and destination of the
_
forwarding to the "Fwd. MULAP" key,
page 65).

page 65.)
