Startup Menu Procedures - Dell PowerEdge VRTX Getting Started Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
for the console:
console# configure
console(config)# line console
console(config-line)# exec-banner
console(config-line)# exit
console (config)# banner exec *
Successfully logged in*
Would you like to enable this banner to all lines? (Y/N)[Y] Y
console# do show banner exec
Banner: Exec
Successfully logged in
console(config)#

Startup Menu Procedures

The Startup menu enables performing various tasks, such as software
download, flash handling and password recovery.
You can enter the Startup menu when booting the device. User input must be
entered immediately after the POST test.
To enter the Startup menu:
• Turn the power on. After the auto-boot messages appear, the following
menu is displayed:
[1]Download Software
[2]Erase Flash File
[3]Password Recovery Procedure
[4]Set Terminal Baud-Rate
[5]Back
The sections below describe the available Startup menu options.
NOTE:
When selecting an option from the Startup menu, take the time-out interval
into account. If no selection is made within 10 seconds (default), the device times
out. This default value can be changed through the CLI.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 3 / 6 / 1 3 - F O R P R O O F O N LY
22
Using the CLI
Plasma\GSG\Plasma_UGUsing_CLI.fm