Table of Contents
Advertisement
1. Determine area points
[ALL]
Starts the measurement to the
point.
[FIND] /
Searches for point in internal
[LIST]
memory.
[ENH]
For manual input of the coordinates.
[1PtBACK] Undo measurement or selection of
last point.
The area (2D) is calculated and displayed
once three points have been measured or selected.
The area (3D) is calculated once the sloped refer-
ence plane is defined by three points.
Programs
2. Results
[Def. 3D]
To define the sloped reference
plane by selecting or measuring
three points.
[VOLUME] To calculate a volume with constant
height. The height have to be
entered or measured.
[RESULT] To display and record additional
results (perimeter, volume).
Perimeter and volume are updated if
further area points are added.
The graphic shows always the area
projected onto the horizontal plane.
77
TPS400-5.0.1en
Advertisement
Table of Contents
