Leica TPS400 Series User Manual page 38

Numerical and Alphanumerical input
Input is made with the softkey bar and the assigned
function keys.
Position the marker in the relevant field.
[INPUT] 1. Calls up the input dialogue.
-
2. Select range of characters /range of
numbers.
[>>>] Additional characters / numbers.
3. Confirm input.
Selection is limited to valid digits for entries,
that due to their display characteristics, fall into a
certain range (e.g. angles in degrees).
TPS400-5.0.1en
Numerical input
Alphanumerical input
38
Measuring Preparation /
Setting up