Table of Contents
Advertisement
Radial Method:
Centre point
In principal both methods are the same.
Any differences will be described.
Procedure:
1. Determine first target point.
[ALL]
Starts measurement to the target
point.
[FIND]
Searches internal memory for point
entered.
2. Determine second target point.
Proceed as with first target point.
TPS400-5.0.1en
Slope distance 1-2
Slope distance 1-3
Slope distance 1-4
3. Result is displayed.
Brg
Azimuth between point1 and point2.
Slope distance between point1 and
point2.
Horizontal distance between point1
and point2.
Height difference between point1
and point2.
Grade
Grade [%] between point1 and
point2.
Softkeys - polygonal method:
[NewPt 1]
An additional missing line is
computed. Program starts again (at
point 1).
[NewPt 2]
Point 2 is set as starting point of a
new missing line. New point (Pt 2)
must be measured.
[RADIAL]
Switches to radial method.
74
Programs
Advertisement
Table of Contents
