Leica TPS400 Series User Manual page 63

[AddPt] Input another backsight point.
[COMPUTE] Calculates and displays the station
coordinates, if at least 2 points and
a distance were measured.
3/I
Indicates that the third point in tele-
scope position I was measured.
3/I II
Indicates that the third point in tele-
scope positions I and II.
Programs
Results
Displays calculated station coordinates:
STATION COORDINATES
Station :
hi :
EO :
NO :
HO :
PREV RESID
[PREV] Switches to measurement display,
to measure additional points.
[RESID] Displays residuals.
[StdDev] Displays standard deviation.
[OK] Sets the displayed coordinates and
instrument height as new station.
63
100
1.500
100.506
100.040
99.999
StdDev OK
TPS400-5.0.1en