Procedure
1. Measuring points defining the reference plane
PLANE 1/3
Measure 1st plane point !
Point 1
:
Point 2
:
Point 3
:
hr
:
:
:
ALL
FIND
Input the name of the first point on the reference
plane and the height of the reflector. Measure the
point.
Repeat this for the second and the third point on the
reference plane.
[FIND]
Starts point search. Exact PtIDs can
be entered or the * wildcard-criteria
used.
TPS400-5.0.1en
A1
-----
IR
-----
1.500 m
-----.--- m
I
-----.--- m
LIST
[LIST]
Displays the list of available points.
[ENH]
Opens the coordinate input mode.
2. Measuring target point
Measure a target point as you usually survey points.
3. Results
PLANE RESULT 1/2
Int.PtID
:
X
:
Z
:
:
NewTgt
STAKE
Int. PtID:
Point ID of the intersection point,
the perpendicular projection of the
target point on the plane.
90
104
1.380 m
4.500 m
2.000 m
NewPlan
EXIT
Programs