Leica TPS400 Series User Manual page 62

Procedure:
Enables you to define an accuracy limit.
TPS400-5.0.1en
Here you can enter a limit for the standard deviation
values. If your computed deviation exceeds the limit
a warning dialog appears, where you can decide
wether to proceed or not.
1. Input of the name of the station and the height of
the instrument.
2. Input of the target PtID and the reflector height.
[ALL] Triggers angle and distance
measurement (3 point resection).
[REC] Saves Hz-direction and V-angle
(resection).
62
Programs