Leica TPS400 Series User Manual page 133

WARNING
Potential hazards are not only related to
direct beams but also to reflected beams aimed at
reflecting surfaces such as prisms, windows,
mirrors, metallic surfaces etc.
Precautions:
Do not aim at areas that are essentially reflective,
such as a mirror, or which could emit unwanted
reflections.
Do not look through or beside the optical sight at
prisms or reflecting objects when the laser is
switched on, in laser pointer or distance measure-
ment mode. Aiming at prisms is only permitted when
looking through the telescope.
Safety Directions
133
TPS400-5.0.1en