Leica TPS400 Series User Manual page 59

Orthogonal Stake out
The position offset between measured point and
stake out point is indicated in a longitudinal and
transversal element.
1) Actual
2) Point to be stake out
L: Longitudinal offset: positive if nominal
point further away.
T: Transversal offset, perpendicular to
line-of-sight: positive if nominal point is
to the right of measured point.
Programs
Cartesian Stake out
Setting out is based on a coordinate system and the
offset is divided into a north and east element.
1) Actual
2) Point to be stake out
E Easting offset between stake out and actual
point.
N Northing offset between stake out and
actual point.
59
TPS400-5.0.1en