Table of Contents
Advertisement
Laser classification
General
The following directions (in accordance with the
state of the art - international standard IEC 60825-1
(2007-03) and IEC TR 60825-14 (2004-02)) provide
instruction and training information to the person
responsible for the product and the person who
actually uses the equipment, to anticipate and avoid
operational hazards.
The person responsible for the product must ensure
that all users understand these directions and
adhere to them.
Products classified as laser class 1, class 2
and class 3R do not require:
•
laser safety officer involvement,
•
protective clothes and eye wear,
•
special warning signs in the laser working
area
Safety Directions
if used and operated as defined in this user manual
due to the low eye hazard level.
Products classified as laser class 2 or class
3R may cause dazzle, flashblindness and afterim-
ages, particularly under low ambient light conditions.
Distancer, Measurements with Reflectors (IR
mode)
The EDM module built into this product produces a
visible laser beam which emerges from the tele-
scope objective.
The laser product described in this section is classi-
fied as laser class 1 in accordance with:
•
IEC 60825-1 (2007-03): "Safety of laser
products"
Class 1 laser products are safe under reasonably
foreseeable conditions of operation and are not
harmful to the eyes provided that the products are
used and maintained in accordance with this user
manual.
129
TPS400-5.0.1en
Advertisement
Table of Contents
