Table of Contents
Advertisement
Beep
The beep is an acoustic signal after each key stroke.
Off
Beep switched off
Normal
Normal volume
Loud
Increased volume
Hz Incrementation
Right
Set right Hz for "Clockwise direction
measurement".
Left
Set left Hz for "Counter-clockwise direc-
tion measurement". "Counter-clock-
wise" directions are only displayed but
saved as "Clockwise direction".
Reticle Illumination
The reticle illumination is only switched on if the
display illumination is on.
Low
Low illumination
Medium
Medium illumination
High
High illumination
Settings
DSP Heater
On
Is automatically activated when the
display illumination is on and the instru-
ment temperature is
Language
The current loaded languages are shown.
Language choice
If two languages are loaded onto the instrument a
dialog to choose the language can be shown directly
after switching on the instrument.
On
The language dialog is shown as
startup dialog.
Off
The language dialog is not shown as
startup dialog.
Data Output
RS232
Data is recorded via the serial interface.
This setting in only required if an
external storage device is connected
and measurements are started at the
TPS with DIST/REC or ALL. This setting
is not required if the TPS is totally
controlled by a datalogger.
95
≤
5°C.
TPS400-5.0.1en
Advertisement
Table of Contents
