Table of Contents
Advertisement
Example "relative to first reference point"
1RP
Hd+
1BP
1RP:
1st reference point
1BP:
1st base point
RH:
Reference height
Hd:
Height difference between reference and
base point
H:
Height difference from reference height
Programs
RH
TPS800_Z39
5. "Stake out" subapplication
You can enter longitudinal, parallel and height
offsets for the target points to be set-out relative to
the reference line. The program calculates the differ-
ence between a measured point and the calculated
point. The program displays the orthogonal ( Line,
H+
Offset,
) differences.
H-
Procedure:
1. Input the orthogonal stake out elements.
2. [OK] Confirm entry and start calculation.
71
) and the polar ( Hz,
TPS400-5.0.1en
,
Advertisement
Table of Contents
