Remote Hydraulic Control Valve Coupler Connecting And Disconnecting - Zetor UTILIX CL Operator's Manual

Remote hydraulic control valve coupler connecting and disconnecting

Connecting
1. Clean both couplers.
2. Remove dust plugs.
3. Insert the implement coupler to the tractor hydraulic coupler.
4. Pull the implement coupler slightly to make sure couplers are firmly connected.
1 - A
2 - B
Disconnecting
1. Lower the implement first to the ground to release hydraulic pressure in the hoses.
2. Clean the couplers.
3. Relieve pressure by moving hydraulic control levers with engine shut off. Pull the hose straight from
the hydraulic coupler to release it.
4. Clean oil and dust from the coupler, then replace the dust plugs.
CONTROLS, INSTRUMENTS & OPERATIONS
56
UCL18N033