Advertisement
HEADLIGHT WASHERS
(fig.17)
Regularly check that the spray jets are
intact and clean.
If it is necessary to direct the jet, contact
an Alfa Romeo Authorised Service
fig. 17
BODYWORK
PROTECTION FROM
ATMOSPHERIC AGENTS
The main causes of corrosion are:
– atmospheric pollution
– salty air and humidity (coastal areas,
or hot humid climates)
– seasonal environment conditions.
Not to be underestimated is also the
abrasive action of wind-borne atmospheric
dust and sand and mud and gravel raised
by other vehicles.
On your car Alfa Romeo has implement-
ed the best manufacturing technologies to
effectively protect the bodywork against
corrosion.
A0A0704b
These include:
– Painting products and systems which
give the vehicle particular resistance to
corrosion and abrasion.
– Use of galvanised (or pretreated)
steel sheets, with high resistance to corro-
sion.
– Spraying of the underbody, engine
compartment, wheel arches and other
parts with highly protective wax products.
– Spraying of plastic parts, with a pro-
tective function, in the more exposed
points: underdoor, inner wheel arch lin-
ings, etc.
– Use of "open" boxed sections to pre-
vent condensation and pockets of mois-
ture from triggering rust inside.
VEHICLE EXTERIOR AND
UNDERBODY WARRANTY
Alfa GT is guaranteed against perfo-
ration due to rust of any original element
of the structure or body. For the general
terms of this warranty, refer to the
Warrantly Booklet.
267
Advertisement
