Advertisement
It is possible to mount both the tradi-
tional restraint system and the type Isofix
one, one on the left and the other on the
right, for example.
Since sizes are different, it is possible to
install max two traditional child's seats on
the rear seats, or two type Isofix child's
seats. On the front passenger's seat it is
possible to mount only traditional child's
seats.
These child's seats are recommended
since they have been designed and exper-
imented expressely for this car.
Mount the child restraint
system only with the car
stationary. The Isofix child
restraint system is properly an-
chored to the mounting brackets
when clicks are heard. In any case,
keep to the installation instructions
that must be provided by the child
restraint system Manufacturer.
FITTING THE TYPE ISOFIX
CHILD'S SEAT
Groups 0 and 0+
For children of the 0 and 0+ group
(babies up to 13 Kg), the child's seat is
facing backwards and the child is restrained
by the child's seat belts (D-fig. 48).
As the child grows, passing to weight
group 1, the child's seat shall be fitted fac-
ing forwards.
For proper mounting proceed as follows:
– check whether the release lever (B) is
at rest position (inward);
– find the presetting brackets (A), then
position the child restraint system with the
fastening devices (C) aligned with the
brackets;
– push the child restraint system until
hearing the locking clicks;
– check proper locking by moving the
child's seat with force: the built-in safety
mechanism actually inhibits proper cou-
pling with only one coupling locked.
fig. 48
A0A0663b
37
Advertisement
