Advertisement
– make sure the compressor switch A-
fig. 16 is set to 0 (off), start the engine
and fit plug A-fig. 17 into the outlet/cig-
ar lighter on the front console and then turn
on the compressor by setting switch A-fig.
16 to I (on);
220
fig. 16
– inflate the tyre to the proper pressure
value. Check tyre pressure on gauge B-fig.
16 with compressor off to obtain precise
reading;
– if after 5 minutes it is still impossible
to reach at least 1.5 bar, disengage com-
pressor from valve and current outlet, then
move the car forth for approx. 10 metres in
order to distribute the sealing fluid inside the
tyre evenly, then repeat the inflation oper-
ation;
A0A1100b
fig. 17
– if after this operation it is still impossi-
ble after 5 minutes to reach at least 1.8 bar,
do start driving since the tyre is excessive-
ly damaged and the quick tyre repair kit can-
not guarantee suitable sealing, contact Al-
fa Romeo Authorized Services;
– after reaching the proper tyre pressure,
start driving immediately;
Apply the sticker in a vis-
ible position for the driver
to indicate that the tyre
has been treated with the quick
tyre repair kit. Drive carefully es-
pecially when cornering and do not
exceed 80 km/h. Avoid heavy
braking and accelerating.
A0A0647b
Advertisement
